Current and Previous month reporting made easy

We’ve all been there. Our shiny new dashboard or report pack is finished and ready to go meet its users.  We’ve presented the key information clearly, we’ve followed all the data vis guidelines on effective charting and use of colour. We like it a lot, and we’ve thought ahead and built in lots of flexibility with slicers and managed drill paths so it can already help answer some of the questions it will doubtless raise.

It’s a little disappointing then that one of the first pieces of feedback is that the senior execs don’t actually want to use the interactivity much. They want to open the dashboard and see the current month picture (or previous month), and don’t want to waste valuable seconds selecting the month in a slicer…

Joking aside, in lots of situations it’s a sensible request, and there are various different ways to handle it in an XLCubed / Analysis Services world. Often this will be for a multi-sheet report incorporating grids, formulae, and charting elements and we need a centralised point to handle the month selection – enter the XL3MemberNavigate() formula.

MemberNav

This lets you pick a hierarchy and a level, and you can specify that you want the Last member (first and previous / next are also available). It’s available in the XLCubed Insert Formula dialog. In our case we’d pick the date hierarchy, the month level and choose Last, generating a formula as below:

=XL3MemberNavigate(1,”[Date].[Calendar]”,”[Date].[Calendar].[Month]”,”LastMember”)

The issue is that at this point it has no concept of data, it will give you the last month available in the hierarchy, not the last month with data. However that’s just another parameter away, we can add dimension member pairs to force a data check, as below, where we are checking that data exists for the “Reseller Sales Amount” measure.

=XL3MemberNavigate(1,”[Date].[Calendar]”,”[Date].[Calendar].[Month]”,”LastMember”,0,”[Measures]”,”Reseller Sales Amount”)

So that will return the last month with data, and as we know in XLCubed all grids, formulae and XLCubed charts can be based off a cell. The Xl3MemberNavigate() cell becomes the driver for all time selections in the report. Job done. Or is it? What if you actually wanted the last complete month? :

=XL3MemberNavigate(1,”[Date].[Calendar]”,”[Date].[Calendar].[Month]”,”LastMember”,2,“[Measures]”,”Reseller Sales Amount”)

Adding the addional ‘2’ parameter means it will go back an additional month, hence giving you the last completed month.

In our experience this is far and away the easiest way to handle current or Previous month reporting, and we hope you find it useful if it’s new to you. For more information on XL3MemberNavigate check our wiki.

 

Creating rounded corners in Excel – revisited

Today we’re revisiting one of our more popular guides, Creating rounded corners in Excel Tables, and have updated it for v7.1. When Igor Asselbergs was contemplating the value of round corners in design, he came to the conclusion that in many cases they added real value to the user experience.

The effect can be explained by the Gestalt Law of ContinuityGestalt is a set of rules based on research into perception psychology, and a very powerful tool for Excel table design. In table design this effect can help us to see the table columns as a unit.

The previous process to create rounded corners in Excel tables required quite a bit of persistence and patience. In Version 7.1, we’ve introduced a feature to enable adding rounded corners in a few seconds rather than several minutes, so while the theory is identical the implementation is much improved. Take this report showing sales KPIs, where we would like to add rounded corners to the header row in the table.

To do this we first highlight the required area:


Then we go to Extras -> Add/Edit Round Corners:


The Colours and Border thickness will be picked up from the selected cells. Select the corners to be made round (in this case the Top Left and Top Right corners):


Click OK to apply the borders

 

To edit existing corners which were created by XLCubed then you can just highlight the cell or range and Go to Extras -> Add/Edit Round Corners. The changes will be applied to the existing corners (or the corners can be removed by unselecting them).

It’s a simple addition to the product which would have saved us quite a bit of time in customer implementations over the years, and hopefully now does the same for our users.

Olympics Treemap

The 2012 London Olympics have now finished, and as a UK company we were pleased to see the games were such a success, and of course that team GB did so spectacularly well! We’re looking forward now to the Paralympics in a couple of weeks, and once the dust has settled there we’ll be shipping a new point release of XLCubed in September.

We’ll keep most of the changes under wraps for now, but one item which we are introducing is treemaps. The Olympic medal table gives us a nice opportunity to better understand the medal breakdown through the  new chart type. In XLCubed, treemaps can be produced directly from a cube or from a table held in Excel, as is the case here. The first example below shows the medals split by country and sport. The size of the rectangle depicts the total number of medals, and the colour shows the number of gold medals, the darker the colour the more gold. The numeric values list the total number of medals, then the number of golds. We can see the USA at the top, and that over half their medals came from swimming and athletics, with a bigger percentage of golds in the pool.

Any of the countries can be drilled into for a large view on their medal breakdown, not that we’re partisan of course… , but the view below is for Great Britain (GBR) where the particularly good showing by the cycling team stands out.

Taking a look at the same data split first by sport and then country, it’s easy to see the countries dominating the medals in each sport, and to delve into more detail by sport where required.


 Drilling into Athletics we can see that USA won most medals, and also most gold. Great Britain had just the 6 medals, but 4 were gold and hence the darker colour on their tile.

We’ll be making an interactive version of this available over the next few days.

 

 

Scott MacCloud Pesents Google Chrome

Scott MacCloud comic writer and expert in visual communication created a set of wonderful, information dense comic pages for Google’s new web browser Google Chrome. He presents on 38 pages the technical concepts behind Google Chrome so that even a layman can understand them.

image

Regarding Google Chrome I found an interesting article over at the Cooper Journal, where Tim wrote that Google Chrome exists, contrary to the believe of the computer press, for one reason: To provide a framework for web-based applications to look, feel, and act like desktop applications. I can’t wait to see the end of the area of crippled web interfaces.

I really can recommend you to add Scott MacCloud’s excellent book Understanding Comics to you data visualization book shelf. A very inspiring book that explains the inner workings of comics and visual communication in general, and most of the insights apply for the design of visual interfaces, usability and data visualization:

Continue reading “Scott MacCloud Pesents Google Chrome”

Microsoft, Pimp Down My Ribbon

There has been a lot of criticism regarding Excel 2007, particularly about the new chart engine, the UI inconsistencies and the Ribbon. Jorge yesterday concluded that Excel 2007 is Useless and Jon wrote a comprehensive analysis about Changes to Charting in Excel 2007 where he expressed his concerns regarding the new Charting. In 2006 Stephen Few reviewed Excel 2007 charting and concluded Excel 2007 charting Preview of an Opportunity Missed. Charley Kyd did a survey about How Do Business Users Like the Ribbon and came back with the result that about 56% of all respondents had a negative opinion about the Ribbon

Continue reading “Microsoft, Pimp Down My Ribbon”